Nicks Belts Rated 4.9/5.0
5 Reasons Why This is The Last Belt Working Men Buy
Built buy 6 pairs of hands, in Spokane, Washington. From a single slab of U.S sourced leather.
"All the belts I owned in the past were like noodles... this belt is a chunky piece of leather that elegantly defies gravity." - FT ⭐⭐⭐⭐⭐
"All the belts I owned in the past were like noodles... this belt is a chunky piece of leather that elegantly defies gravity." - FT ⭐⭐⭐⭐⭐
1
It won't stretch out or split like your last belt.
Most belts are two thin layers glued around a filler. They stretch, the holes go oval, and then it starts to split...
This is one solid piece of 13 to 15 oz Wickett & Craig leather. It holds its shape through a full day's work, every day.
"Perfect fit and clearly not a layered piece of junk." - Mark D Turner ⭐⭐⭐⭐⭐
This is one solid piece of 13 to 15 oz Wickett & Craig leather. It holds its shape through a full day's work, every day.
"Perfect fit and clearly not a layered piece of junk." - Mark D Turner ⭐⭐⭐⭐⭐
2
Carries a tape, a knife and a phone. No sagging.
Hang a tape measure, a knife and a phone off a cheap belt and your pants are halfway down by lunch.
Thick leather holds the load flat on your hip. Go 1.75" if you carry weight on it every day. Most men are fine at 1.5".
"Got the 1 3/4 width because it fits in the belt loops better and holds EDC stuff up pretty good." - GENO S. ⭐⭐⭐⭐⭐
Thick leather holds the load flat on your hip. Go 1.75" if you carry weight on it every day. Most men are fine at 1.5".
"Got the 1 3/4 width because it fits in the belt loops better and holds EDC stuff up pretty good." - GENO S. ⭐⭐⭐⭐⭐
3
Solid brass buckle. No plating to chip off.
Most buckles are zinc painted gold. The finish chips, the prong snaps, and the belt's done.
Ours is solid brass, held on with Chicago screws. Want a new buckle one day? It's a screwdriver and a minute. The belt keeps going.
"This belt is solid leather. It will not peel. It has a nice brass buckle and it fits well." - Alan ⭐⭐⭐⭐⭐
Ours is solid brass, held on with Chicago screws. Want a new buckle one day? It's a screwdriver and a minute. The belt keeps going.
"This belt is solid leather. It will not peel. It has a nice brass buckle and it fits well." - Alan ⭐⭐⭐⭐⭐
4
Made by hand in America. Not in some overseas factory.
No overseas factory, no production line. The person who cuts your belt stitches and finishes it too.
American leather from a Pennsylvania tannery, built in Spokane in the same building as Nicks Boots. They've made boots there since 1964.
"Great quality strong feel like a genuine American made product ... Looks and feels like it will last a lifetime." — Anthony DeMuro ⭐⭐⭐⭐⭐
American leather from a Pennsylvania tannery, built in Spokane in the same building as Nicks Boots. They've made boots there since 1964.
"Great quality strong feel like a genuine American made product ... Looks and feels like it will last a lifetime." — Anthony DeMuro ⭐⭐⭐⭐⭐
5
Ten-year guarantee. Buy it once and be done.
Cheap belts cost you twice. You buy one, it's shot in a year, and you're back buying another.
If ours fails because of how we made it, we repair or replace it for ten years. Stitching, hardware, leather, all of it.
"All around superior at a better price point." — Peter ⭐⭐⭐⭐⭐
If ours fails because of how we made it, we repair or replace it for ten years. Stitching, hardware, leather, all of it.
"All around superior at a better price point." — Peter ⭐⭐⭐⭐⭐
Rated 4.9/5.0
Nobody Buys Just One
The plan is always one belt. Then another leather catches your eye. Two belts, 15% off. Three, 25% off.
Heavy Duty Work Belt
$120.00
Your Questions Answered
The things people actually email us about before they order.
Which leather should I get?
Depends how much you want it to change.
Natural Double Stuffed and Full Natural Skirting change the most. Buck Brown and Tan English Bridle start warm and deepen. Black and Slate look settled from day one.
Can't pick? Two belts are 15% off, three are 25% off.
Natural Double Stuffed and Full Natural Skirting change the most. Buck Brown and Tan English Bridle start warm and deepen. Black and Slate look settled from day one.
Can't pick? Two belts are 15% off, three are 25% off.
Will it match my boots?
Not exactly, and it shouldn't. Matching leather to leather looks like a set you bought together. Work one shade off your boots and both look better, and once the belt takes its patina it'll settle into the range anyway.
Chicago screws or rivets?
Chicago screws. Rivets are permanent, which is fine until you want a different buckle or you damage the one you've got. With screws the buckle comes off with a screwdriver in a minute, so the belt outlives any single piece of hardware on it.
How long does it take to break in?
A few weeks of regular wear. It's stiff out of the box, because a belt that's soft on day one got there by being thin. It softens and starts taking colour inside the first month.
What size do I order?
Take your trouser waist and add four inches. A 34 waist usually takes a 38 belt.
Between sizes? Email customerservice@nicksboots.com before you order. Thirty-day returns on new, unworn belts.
Between sizes? Email customerservice@nicksboots.com before you order. Thirty-day returns on new, unworn belts.
Which width, 1.5" or 1.75"?
1.5" is the standard and the one most men should buy. It fits jeans, work trousers and most belt loops.
1.75" is for the wider look, or for carrying weight on the belt. Check your loops first. Some dress trouser and suit loops are a squeeze.
1.75" is for the wider look, or for carrying weight on the belt. Check your loops first. Some dress trouser and suit loops are a squeeze.
Will it stretch out like my last belt did?
Not the way a thin or filled belt does. At 13 to 15 oz there's enough leather to hold its shape, and the oblong holes don't pull into ovals.
All leather relaxes a little. That's break-in, not failure.
All leather relaxes a little. That's break-in, not failure.
What does the ten-year guarantee actually cover?
If it fails because of how we made it, we repair or replace it for ten years. That covers stitching, hardware, leather separating and structural failure.
It doesn't cover normal wear, patina, scuffs or damage from soaking, cutting or chemicals. Not sure? Send us a photo.
It doesn't cover normal wear, patina, scuffs or damage from soaking, cutting or chemicals. Not sure? Send us a photo.
Is it really American made?
Every belt is cut, stitched and finished in Spokane, Washington, in the same building as Nicks Boots. The leather is Wickett & Craig, a Pennsylvania tannery. We use US-sourced materials wherever we can get them.
How do I look after it?
Very little. Keep it out of prolonged soaking, and give it a conditioner once or twice a year if it starts feeling dry.
Don't try to keep it looking new. The marks are the point.
Don't try to keep it looking new. The marks are the point.
